Five factors affecting new jaw crusher productivity

Time: 2015-01-04

Factors new jaw crusher productivity, including many in the course of daily operations, due to the operator neglect of these factors led to a significant reduction in the production efficiency of the crusher. Shanghai Zenith through the survey found, the impact of new jaw crusher productivity factors include five aspects, now factors in these five areas and their corresponding solution strategies are summarized as follows:

1, the material hardness:

Harder materials broken up more difficult and more serious wear and tear on equipment. Broken slow, low capacity. Therefore, we need to pay attention on the choice of materials.

2, the material composition:

Jaw crusher materials contained in the powder, the more influence Sand, because these fines easy adhesion of transport. So much for the fines content of the material should advance once sieve. The fine selection from the material as much as possible out, so as not to affect the normal operation of the jaw crusher.

3, after a broken jaw crusher material fineness:

Fineness requirements, which requires the crusher out the finer material, the crushing capacity better. This aspect should be based on specific requirements, such as no special requirements, the fineness of the material is generally based system for the fine can be.

4, the viscosity of the material:

The viscosity of the material, the more easily adhered. The inner wall of the viscosity of the material in the jaw crusher crushing chamber will adhere to, if not promptly clean up, will affect the efficiency of jaw crusher, serious cases may affect the normal operation of the jaw crusher. So, the choice of materials, they must pay attention to the viscosity of the material should not be too large.

5, the humidity of materials:

Larger water containing material, the material is easy to adhere to the jaw crusher content, but also easy to process the next conveyor clogging, causing sand making capacity is reduced. To solve this problem, when the selected material necessary to strictly control the humidity of materials, the humidity control in place of the selected material. Only by mastering factors jaw crusher productivity, can address the problem, find the crux of the issue, so as to improve the performance of the machine, improve production efficiency of the machine!